
When you need reliable sprinkler repair in Garland, TX, The IrriGators are ready to diagnose and repair problems affecting your irrigation system. Broken sprinkler heads, underground leaks, cracked pipes, faulty valves, wiring issues, low water pressure, and malfunctioning controllers can waste water and leave your lawn with dry, flooded, or unevenly watered areas.
Garland’s clay soil expands and contracts as weather conditions change, causing sprinkler pipes, fittings, valves, and heads to shift, crack, or leak. Tree roots, lawn equipment, freezing temperatures, landscaping projects, aging irrigation components, and normal system wear can also cause sprinkler system failures.
The IrriGators provides professional Garland sprinkler repair throughout Firewheel, Springpark, Club Hill, Duck Creek, Oakridge, Camelot, Coomer Creek, Shores of Eastern Hills, The Greens, and surrounding neighborhoods. Our sprinkler repair services include leak detection, broken sprinkler head replacement, valve and pipe repair, controller troubleshooting, wiring diagnostics, backflow device troubleshooting, and complete irrigation system inspections.
Whether your sprinkler system will not turn on, a zone will not shut off, or your lawn has poor sprinkler coverage, our team can locate the problem and recommend the proper repair. From Downtown Garland and Firewheel Town Center to neighborhoods near Lake Ray Hubbard, Highway 66, and President George Bush Turnpike, The IrriGators helps Garland homeowners conserve water and keep their sprinkler systems operating efficiently year-round.
Watering rules can vary by city, water provider, HOA, and current drought conditions. Homeowners in Garland should make sure their sprinkler system follows the city’s seasonal watering schedule, operates efficiently, and avoids overspray or runoff onto sidewalks, streets, driveways, and neighboring properties.
The IrriGators can adjust sprinkler heads, repair leaks, improve coverage, and optimize controller schedules so your irrigation system waters effectively without unnecessary water waste.
The City of Garland currently limits in-ground sprinkler-system use to no more than two days per week from April 1 through October 31. Customers may choose their two watering days, but automatic irrigation systems may not operate between 10:00 a.m. and 6:00 p.m. during this period.
From November 1 through March 31, in-ground sprinkler-system use is limited to no more than once per week on a day selected by the customer. Additional watering with a hand-held hose equipped with an automatic shutoff nozzle, soaker hose, or drip-irrigation system may be permitted when it does not create excessive runoff or other water waste.
Garland irrigation systems should be maintained to prevent broken-head overspray, stuck valves, underground leaks, standing water, and runoff onto streets, sidewalks, driveways, and neighboring properties. Irrigation systems should not operate during rain, and damaged sprinkler heads, leaking valves, and other water-wasting problems should be repaired promptly.
The IrriGators provides licensed sprinkler repair and irrigation services in accordance with applicable City of Garland and TCEQ requirements. Because watering schedules may become more restrictive during drought conditions, periods of high demand, or water-supply emergencies, customers should review Garland Water Utilities’ current watering information before changing controller settings.

Underground sprinkler pipes can crack or separate as North Texas clay soil expands, dries, and shifts around buried PVC. Mature tree roots, landscape renovations, excavation work, and aging fittings can also damage irrigation lines. Common signs include soggy patches, unusually green areas, washed-out soil, low pressure, or several heads producing weak spray in the same zone. A concealed leak may continue wasting water while reducing coverage and weakening the soil around nearby landscaping or hardscaping.
The IrriGators locate and repair sprinkler pipe leaks, replace damaged lines and fittings, and restore dependable pressure, flow, and coverage throughout Garland.

Backflow devices sit outside year-round, where prolonged heat, sudden freezes, debris, and pressure fluctuations can wear down internal components. Seals may deteriorate, springs can weaken, and shutoff valves or test cocks may begin leaking over time. Dripping from the relief valve, visible cracking, water spraying from the assembly, unusual vibration, or reduced sprinkler pressure may indicate a developing problem. Prompt repairs help prevent unnecessary water loss and protect the performance of the irrigation system.
The IrriGators repair and replace residential irrigation backflow devices, then verify pressure, flow, and proper system operation throughout Garland.

A zone that stays on, refuses to start, or takes too long to shut down often points to a problem inside the sprinkler valve. Worn diaphragms, damaged solenoids, clogged passages, loose wiring, root intrusion, and debris in the valve can interfere with normal operation. Other symptoms may include standing water near the valve box, dry sections of lawn, reduced pressure, humming noises, or continued flow after the watering cycle ends. An unresolved valve issue can waste water and affect multiple parts of the landscape.
The IrriGators diagnose sprinkler valve problems, test electrical components, inspect the valve assembly, and correct the cause of zone failure throughout Garland.

Unexpected watering times, skipped zones, or lost schedules may be caused by the controller, rain sensor, power supply, or incorrect programming. Electrical surges, aging control panels, faulty sensors, duplicate start times, and seasonal schedule changes can all lead to inconsistent operation. A blank screen, missing settings, repeated cycles, stations that will not activate, or excessive run times are common warning signs. Controller problems can increase water use while still failing to provide the lawn and landscaping with balanced coverage.
The IrriGators troubleshoot conventional and smart sprinkler controllers, correct programming and electrical problems, and restore reliable schedules and zone operation throughout Garland.

Sprinkler wiring can become damaged beneath the lawn, inside valve boxes, or at connections between the controller and field valves. Landscape work, utility repairs, moisture, rodents, corroded terminals, failed solenoids, and poorly sealed splices are frequent causes. Homeowners may notice one zone working intermittently, several stations failing together, humming valves, controller error messages, or no response from a specific valve. Electrical faults caused by moisture may seem to disappear before returning during a later watering cycle.
The IrriGators trace sprinkler wiring, locate concealed electrical faults, repair damaged connections, and restore communication between controllers, valves, and zones throughout Garland.

Broken, tilted, or poorly adjusted sprinkler heads can send water onto sidewalks and driveways while leaving nearby turf or flower beds dry. Mowers, vehicles, foot traffic, shifting soil, clogged nozzles, worn seals, and landscape changes can all interfere with proper spray patterns. Signs of trouble include leaking after shutdown, heads that remain below the grass, misting, weak spray, uneven coverage, or recurring dry spots. Extending the watering time usually increases runoff without correcting the underlying head or nozzle problem.
The IrriGators repair and adjust sprinkler heads, correct height and alignment, match nozzles and precipitation rates, and restore efficient, even coverage throughout Garland.

Copyright © 2026 The IrriGators - All Rights Reserved.
Irrigation services performed under the supervision of Texas Licensed Irrigator LI0023528
Like most companies, we use cookies to analyze website traffic and optimize your website experience.